Product Overview
DAYTONA SR400 / SR500 ('83~19) LONG DE-COMP CABLE, +120mm, 22356.
The DAYTONA +120mm LONG DE-COMP cable suits the SR400 carb and FI bikes built between (78~18) & the SR500 (78~99) with custom (non genuine) bars, Tracker bars, Scrambler bars. The long length De-Comp cable is also often used with standard / factory bars (on the early 78~82 factory "wide bar") as a OEM replacement.
DETAILS: .
- Suits: SR400/SR500 (83~08) & SR400FI (10 ~18) and all other SR's (78~82 etc.)
- Length: +120mm LONG (+120mm longer than standard)
- Material: Black PVC outer, Stainless wire, Steel fittings
- Other: Made in Japan
The Length of this cable is referred to as +120mm for 83~19 models. Some early model bikes (78~82) had "wide bars". In that case the cable may be shorter than (+120mm) when compared to the early model wide bars. If unsure of suitability, consider that the cable is for use with the DAYTONA Dirt Tracker bars, DAYTONA Scrambler bars (low and high) and other bars we sell such as the CB750K0 bars (and also for similar custom bars by other makers).
NOTE: Always ensure your new cable is adjusted correctly and the de-comp and related parts are in good working order. Cable should be lubed when fitting and ends should be greased. Ends are made for the factory de-comp lever. If you have made changes to the lever ensure it is suitable for use with SR cables. If unfamiliar with the replacement process check your workshop manual, if in doubt have a professional, licensed mechanic fit the cable for you. Cables should always be tested before use on road to ensure the return function is uninhibited and cables have correct free play adjustment.
