Product Overview
DAYTONA SR400 / SR500 >'83~21< LONG DE-COMP CABLE, +120mm, 22356.
The DAYTONA +120mm LONG DE-COMP cable suits the SR400 carb and FI bikes built between (83~21) & the SR500 (83~99) with custom (non-genuine) bars, Tracker bars, Scrambler bars.
For the SR400/500 built between 83-21, they had a 670mm standard length cable. This cable is considered +120mm longer than the standard 83-21 model factory cable at approx. 790mm (end to end of the casing - not wire).
However, the +120mm long length De-Comp cable is also often used with standard / factory bars on the early 78~82 factory (known as the SR "wide bar") as an OEM replacement. In other words, for the 78-82 models (AU/US), the handlebars were wider and higher from factory than JDM models built between 83 and 2021, so for the early 78 to 82 this cable is similar to stock (as the early bars had wider and higher specs!).
DETAILS:
-> Suits: SR400/SR500 (83~08) & SR400FI (10 ~21) and can be used on SR's (78~82), see length notes above!
-> Length: +120mm LONG (+120mm longer than standard 83-21) = approx. 790mm long
-> Material: Black PVC outer, Stainless wire, Steel fittings
-> Other: Made in Japan
As noted above, the length of this cable is referred to as +120mm for 83~21 models. Early model bikes differed from factory (78~82) as they had the "wide bars". In that case the cable may be shorter than (+120mm) when compared to the early model wide bars. If unsure of suitability, consider that the cable is also for use with the DAYTONA Dirt Tracker bars, DAYTONA Scrambler bars (low and high), POSH Super Tracker Bars, Goods Co. Ltd Flat Track bar and other bars we sell such as the W1 bar (and also for similar custom bars by other makers).
NOTE:
1. Always ensure your new cable is adjusted correctly, and the de-comp and related parts are in good working order.
2. Cable should be lubed when fitting and ends should be greased.
3. Ends are made for the factory de-comp lever. If you have made changes to the lever, ensure it is suitable for use with SR400 and SR500 cables.
4. If unfamiliar with the replacement process check your workshop manual. If in doubt a professional, licensed mechanic should fit and adjust the cable for you.
5. Cables should always be tested before use on road to ensure the return function is uninhibited, and cables have corrected free play adjustment.
Daytona Japan (Daytona Corporation) has been a leader in motorcycle parts industry since 1972. Daytona provides original and customized motorcycle parts and accessories throughout Japan and to the international marketplace. Daytona’s specialty is R&D to develop original motorcycle parts and accessories which meet the demand in the highly competitive Japanese motorcycle industry and abroad.
