Product Overview
DAYTONA PHONE HOLDER - original specification of Minoura (iH-220/520), body, central screw fastening "rigid type". Note: some images here show the quick release version (images are for illustration only) - this kit fixed clamp type as seen in the first image (Black clamp).
Daytona's popular phone holder is a stable and secure holder for a variety of smartphones. The smartphone is held securely and gently and can be quickly and easily removed from the holder. The Daytona smartphone handlebar mount holds your smartphone securely at 4 points and is also held with a silicone rubber band.
Specially equipped with a small wing lock and release button for easy one-handed operation. Fitted with a pivoting clamp and silicone band clasp. The upper side of the body has been extended by approximately 12mm, the long center pad secures the fitted surface.
Approximate dimensions: Width: 55 to 85mm, Thickness: 6 to 18mm, for phones weighing: 300g or less
Technical data:
- Fixed design - "RIGID TYPE" means the holder bracket is fixed with a bolt.
- Suitable for smartphones with a width of 55 - 85 mm
- Suitable for smartphones with a height of 110 - 147 mm (with enclosed special arm are over 153 mm height is possible)
- Suitable for smartphones with a height depth of 8 - 18 mm
- Suitable for smartphones weighing up to 300 g
- Secure handlebar clamp made of metal
- Clamp is suitable for 22 - 29 mm handlebars
- Precisely adjustable joints made of metal
- Angle adjustable in 2 levels
- Vibration proof
- English instructions provided
- Compatibility: iPhone 11/Xs/Xs Max/XR/SE2/X/8/7/6s/6s Plus (* suggested only - please check dimension to confirm)
- Made in Japan for peace of mind.
Attention:
- When installing the clamp on the handlebar, select the clamp spacer (shim) that suits your bar size. Ensure fitment is secure.
- Do not re-tighten the special bolt (clamp adjustment bolt) after installing the clamp on the handlebar, as it may cause damage to the parts.
- Even if the clamp is within the specified dimensions, some phone models may not be compatible due to their shape or specifications.
- In addition, the position of the power button, camera, speaker, earphone jack, etc. varies depending on the phone model used, please check suitability before purchase.
- Adjustment of the moving parts of the product, reassembly of the parts, installation to the bike, and installation of the phone should all be done at the user's own risk.
Adjustment
- Daytona will not be held responsible for any damage to or loss of parts at the adjustment or reassembly points, or any malfunction (failure, damage, water damage, dropout, theft, etc.) or accidental damage that may occur to the product or the phone that is attached to the product.
- It is not recommended to use the phone holder with the slide arm extended to its maximum vertical position. The arm may break due to vibration. Daytona will not be held responsible for any damage.
- The lock may come off depending on the degree of impact that occurs when going over large bumps on the road surface (or in the event of an accident), regardless of whether the road is paved or unpaved. It is the user's responsibility to take all necessary measures to prevent the phone holder, its components, and the installed phone model from falling or becoming dislodged.
This product and its components are made of metal or resin.
- The phone holder and its components are made of metal or resin. Even if the product is not used in a certain environment, the material may deteriorate (including rust) due to aging or wear and tear over time, especially if bike is parked regularly by the sea, which may cause unexpected problems or accidents such as damage to parts.
- Please check the condition of the holder every time before using it (pay particular attention to the moving parts of adjustment, fixed parts, and parts where rainwater tends to accumulate), and if there is any abnormality, replace the product with a new one (parts or product) as appropriate.
- *Spare parts are available by request in the event they are required for repairs or overhaul.
