Product Overview
DAYTONA PHONE HOLDER "RIDGID TYPE" 80218
Daytona's popular phone holder is a stable and secure holder for a variety of smartphones. The smartphone is held securely and gently and can be quickly and easily removed from the holder. The Daytona smartphone handlebar mount holds your smartphone securely at 3 points and phone is also held with a silicone rubber band for additional security.
Features:
- This model is securely fixed with bolt fastening (fixed / rigid clamp type).
- With three fixing points, the Daytona phone holder is compatible with smartphones that use a horizontal centre button.
- No tools are required to rotate the body with the smartphone attached.
- Aluminium parts are used. (= Light weight, high strength, corrosion resistant.)
- The slide arm is made of high-strength aluminium, making it compatible with larger types of smartphones
- Incl. Hex wrench, Silicon band x 2
Technical data:
- Vertical adjustment: adjustable range 123-170mm
- Thickness adjustment: 6~18mm/left/right
- Adjustment range: 55-85mm
- Body rotation: 360° rotation/left/right pivoting
- Weight: for phones that weigh 300g or less
- Suits: handlebars with an outer diameter of: ∅ 22 – 29mm
- Guides: English instructions provided
- Compatibility: iPhone 11/Xs/Xs Max/XR/SE2/X/8/7/6s/6s Plus (* suggested only - please check dimension to confirm)
- Made in Japan for peace of mind.
Attention:
- It can be (is) prohibited by law for a rider / driver to look at the screen of a smartphone, navigation system, or cell phone while riding or driving & to use the phone function. Using while riding can be the cause of serious accidents due to inattention to the road ahead. If you need to use the phone, stop in a safe place to do so.
- Installation to bars other than the design outer diameter (∅22 to 29) or odd-shaped bars is not possible.
- Do not install the product with a phone that exceeds the design weight limit (up to 300g).
- The product must not be installed in such a way that it touches other parts of the car body (so as to avoid constant vibrations).
- The button bolt at the center of the main unit (the bolt that connects the main unit to the pivoting clamp) must not be adjusted or disassembled.
- The use of solvents or chemicals that may damage the material of the product, such as the application of anti-loosening agents to each bolt, is prohibited.
- When installing the clamp on the handlebar, select the clamp spacer (shim) that suits your bar size. Ensure fitment is secure.
- Even if the clamp is within the specified dimensions, some phone models may not be compatible due to their shape or specifications.
- In addition, the position of the power button, camera, speaker, earphone jack, etc. varies depending on the phone model used, please check suitability before purchase.
- Adjustment of the moving parts of the product, reassembly of the parts, installation to the bike, and installation of the phone should all be done at the user's own risk.
Adjustment
- Daytona will not be held responsible for any damage to or loss of parts at the adjustment or reassembly points, or any malfunction (failure, damage, water damage, dropout, theft, etc.) or accidental damage that may occur to the product or the phone that is attached to the product.
This product and its components are made of metal or resin.
- The phone holder and its components are made of metal or resin. Even if the product is not used in a certain environment, the material may deteriorate (including rust) due to aging or wear and tear over time, especially if bike is parked regularly by the sea, which may cause unexpected problems or accidents such as damage to parts.
- Please check the condition of the holder every time before using it (pay particular attention to the moving parts of adjustment, fixed parts, and parts where rainwater tends to accumulate), and if there is any abnormality, replace the product with a new one (parts or product) as appropriate.
- *Spare parts are available by request in the event they are required for repairs or overhaul.
