Product Overview
DAYTONA OIL TEMP SENSOR "SUMP BOLT" FITTING FOR 1/8” SENSOR, M14 X P1.5, 34912, MADE IN JAPAN.
The 34912 (M14mm x 1.5P) temp sensor "threaded sump plug bolt" can be used with the VELONA temp sensors that have a 1/8" centre thread. Or you can use with other suitable temp sensors requiring a 1/8" thread (& M14 x 1.5).
Details:
- Replaces the original oil pan drain bolt. (Or use in an oil tank with M14 x 1.5 thread)
- The temp sensor mounting thread = R1/8 (1/8”).
- Includes alloy washer gasket thickness: 0.08 inches (2 mm).
- Size: M14 x 1.5
- Material: Brass
- Use with optional temp sensor for Daytona VELONA & DEVA-01 meters (or other).
Set includes:
- 1 x Oil temp sensor sump plug bolt.
- 1 x Alloy washer - (*Image above shows the alloy washer).
Attention:
- Do not over tighten the sump bolt. Only fit to require sump plug bolt torque. (approx. 20Nm).
- Listing is for the sensor fitting with alloy washer only. Temp sensor shown in example image is NOT included.
Compatible models: (M14 X 1.5mm).
HONDA: CB1300SF/SB (03-10), CB1300SF (98-02), X4 (97-99), CBR1100XX (97-98), X11 (99-01), CB1000SF (92-97), CB750F (79-82), S650 400 (88-90), Steed 600/400 (88-98), VRX400 Roadster (95-99), Hornet 250 (96-07), JADE (91-93), CBR250R (88-99), YAMAHA: VMAX (95-9), YZF-R1 (98 99), TR X850 (95-99), TDM850 (92-99), YZF750 (93-97), FZR750 (87-88), FZX750 (90-99), SRX600 (85-94), SR500 (78-99), XT500, XJR40 0 (93 -08), FZ400 (97-99), SRX400 (85-96), SR400 (78-20), Virago 400 (87-94), Dragster 250 (06) / XV250, Virago 250 (88-96), KAWASAKI: 900RS (73-75), [Z1] 750RS (73) Z750FX.
Note: This is an example list of the compatible models only. Please make sure you check your bikes details and required bolt size before placing your order.
