Product Overview
DAYTONA VELONA60, BLACK SPEEDO, 260km/h/Mph, LED LIT, (C.E.) & E MARKED + DASH LIGHTS, 88643
The VELONA60 260km/h (or mph) Speedometer (like the 200km/h version) is without a doubt one of the most sort after Daytona Speedometers available! Offered with a stainless housing finished in satin black and a unique spherical lens give the VELONA60 a standalone design. The gauge has digital functions with an analogue style dial which compliments modern and classic bike builds. The 60mm VELONA also has neatly placed inbuilt dash lights and an LCD screen to keep an eye on essential functions such as Odo, Trip, Voltage. These features add to the clean and minimal layout, and being 260km/h (mph) the dial range suits larger bikes with higher top end speed requirements. To finish off, you get modern LED back lighting. Combine all these features and this gauge ticks all the right boxes making it one of the most popular Speedometers available for garage builders and professional custom bike builders alike.
Compared to your old dull OEM bulb lit gauges, with the VELONA60 LED backlighting, night rides will be instantly transformed with enhanced visibility. And just to ensure owners in all regions can use this gauge safely, the speed setting is selectable between km/h and mph.
In summary, the 60mm VELONA is a versatile gauge that complements just about any bike build style, including vintage, custom, scramblers and café-style motorcycles, and of course it can be used as an OEM replacement when needed. Its low body height offers a sleek stealth look while providing essential information for the rider.
A set of instructions is included (in English) and we carry all of the complementing optional parts if needed. And of course, we are here to help with your purchase and install questions if needed!
+ Checkout the product preview video tab below for an overview of this great product.
Note: one of the video's is of the series without dash lights, it is for a general overview only. Keep in mind this gauge has dash lights!
CERTIFICATION:
The VELONA 60 is ECE approved (ECE-R10), TUV, ABE & (C.E.) certified to meet strict Euro requirements for road use.
FEATURES:
- Digital LCD: ODO meter / TRIP meter 1 & 2 / Voltmeter / Max Speed.
- Colour: Black rim / Black body.
- Stepping motor driven speedometer with accurate speed display.
- Dash Lights: (High Beam, Turn Signal LH / RH, Neutral, Optional warning light).
- Diameter: Ø 60mm x Depth 42,5mm
- Black stainless-steel housing
- Black scale with white LED backlight
- Up to 260 Km/h or 260 MPH (selectable)
- ODO: 0-99.999 km/miles
- Double trip counter: 0-99.999 km/miles
- V-shaped bracket included.
- DC-power: 0-18V (normal 12V) - "voltage meter"
- E-marked, ECE approved (ECE-R10), TUV, ABE & (C.E.) certified.
- On start up the gauge swings into action with a welcome function.
- Power operational range - DC 10-16 (regular 12V) - NOT suitable for 6v bikes.
- Great price point for a quality gauge compared to other offerings.
- Tried and tested over many years first hand, & by owners and custom bike builders.
- The reliability that you want, (unlike cheap no-name gauges sold elsewhere).
- Trusted by our direct customers, custom bike builders & the various dealers that we supply!
OPTIONAL PARTS:
To compliment the great VELONA gauge range, VANEM stocks many optional add on products to help you get the job done. From the many variations of dash light units, anti-vibration stays with different offsets and angles & essentials like speed sensors, wiring and switches, VANEM has you covered with all of your needs to get the job done like a pro!
NOTES & CAUTIONS:
1. -> *If the bike has a standard electronic signal for speed, this speedometer can be connected to this original electronic signal in most cases (but not all). eg: W650, & many Harley models can be directly wired in etc. etc. However, please see notes below regarding Can Bus equipped bike models.
2. -> *If the bike is not equipped with a standard electronic signal for speed, please purchase and use the active Daytona sensor (#87038) or one of the model specific DAYTONA pulse sensors. We stock sensors for popular models such as the SR400/500, Modern Triumphs, Classic BMW's and more! (find sensor within the gauge accessories page here).
3. -> *Keep in mind this gauge is not suitable for 6-volt use (& many 6volt to 12v conversions). It is also *NOT suitable for use with battery lesser or bikes with highly stripped back modified race type ignition systems.
4. -> *If your particular bike suffers from "excessive" electrical noise in the system, and your gauge has an unstable needle (or is an older model), Tacho "Optional resistor wire 98641" can be used to stabilise the tachometer, and for the Speedo side the use of the DAYTONA Speedometer "Optional Harness" 98642 can in certain circumstances also aid in stabilisation of the dial and function. The optional add on parts are generally not required, but some bikes with certain ignitions systems may require them (typically older bikes such as CB750 / CX500 etc.).
FAQ:
Q: Do we sell a matching Tachometer for this Speedo?
A: Yes, please see part numbers 88677 (for the directly matching 15,000rpm) and you can use the 88644 (for 9000rpm) but 88644 markings are larger.
Q: Can I use this gauge on 6-volt bikes?
A: No, this product is for 12v use only.
Q: Can I mount this gauge directly to the engine or bracket attached to the engine?
A: It is not recommended, as excessive vibrations and heat can damage the gauges internals. Warranty will be void for mounting gauges in this manner.
Q: Are instructions included?
A: Yes, English instructions are included, and you can see the guides in our main image selection.
Q: Can I fit this to a 2009~ onwards Triumph with Can Bus or a HD model with Can Bus systems.
A: In short yes, however, it is widely known that Tri models with C/Bus & some HD models with C/Bus will need the use of a third-party control module to facilitate the Can Bus system. On some models, if you are bypassing when doing extensive custom wiring you may have work arounds available depending on the bike model. But in general, a add on control module will be required.
Please note, we do not offer third party controllers for Can Bus, and we cannot give you step by step details or recommendations for third party products. On such models if unfamiliar with wiring and requirements, please talk to your bike builder.
Produced by DAYTONA Japan, imported, sold and distributed by VANEM within Aust.!
Daytona Japan (Daytona Corporation) has been a leader in motorcycle parts industry since 1972. Daytona provides original and customized motorcycle parts and accessories throughout Japan and to the international marketplace. Daytona’s specialty is R&D to develop original motorcycle parts and accessories which meet the demand in the highly competitive Japanese motorcycle industry and abroad.