Product Overview
DAYTONA VELONA electric Tachometer optional harness (1 MΩ) 98641.
This harness is used to correct unstable or noisy pulse signals. Certain models can have a poor or noisy pulse signal that can create an unstable needle or intermittent fluctuations of the dial needle, on problematic bikes this optional harness can help correct bad pulse signals and stabilize the needle.
- Overall length: 120mm
- Capacity: 1MΩ
- Made in Japan
NOTE: As this is a universal product, there are situations where the harness set will not operate properly or correct unstable dials. Some race coils, ignition systems and or spark plugs/caps etc. may interfere with use. If in doubt speak with us or your selling dealer.
Bikes confirmed operation with this harness.
- HONDA CROSS CUB ('13~'19)
- HONDA REBEL/CMX 250/500 ('17~'19) & (20~23)
- HONDA CL500 (2023~)
- HONDA GB350 (2023~)
- HONDA CBX / CB (VARIOUS)
FAQ:
Q: Is a wiring diagram supplied?
A: Yes, we have provided an English wiring diagram. (*English and Japanese guides are supplied with the product when purchased, also see image above).
Q: Can this product also be used with VELONA Speedometers?
A: NO. This product is used for RPM pulse ONLY!
ATTENTION: Do not connect the wire harness to anything other than the pulse line of the tachometer. The wiring color for the pulse input wire may differ for each meter model (for example 48mm gauges and 60mm gauges pulse wire colour may differ). Please refer to the gauges instruction manual when wiring to ensure you are connecting to the correct wire (pulse wire). Please be careful to not bend or force the harness section that contains the resistor when fitting - as you may damage it.
