Product Overview
The DAYTONA SR400/500 de-comp cable (-100mm) - PART NUMBER 30176 suits all SR models (78~18).
The short length CLUTCH cable is for use with clip on bar specification or low clubman type bars. In some cases it is also used with narrow drag bars. This cable also has a mid way adjuster. End fittings are correct for the SR throttle / switch block, and engine holder.
- Suits: SR400/SR500 (78~08) & SR400FI (10~18) suitable for clip on bar use and some low bars or lowered bikes
- Length: -100mm SHORT (- 100mm shorter than standard)
- Material: Black PVC outer, Stainless wire, Steel fittings
- Other: Made in Japan
NOTE: The Length of this cable is referred to as -100mm (short). Some early model bikes had "wide bars". In that case the cable may be shorter than -100mm. if unsure of suitability, consider that the cable is for clip on bar use (or similar low bars).
Always ensure your de comp cable is adjusted correctly and the de-comp and related parts are in good working order. Cable should be lubed when fitting and ends should be greased. Ends are made for the factory lever, If you have made changes to the de-comp lever ensure it is suitable for use with SR cables. If unfamiliar with the replacement process check your workshop manual, if in doubt have a professional, licensed mechanic fit the cable for you.
