Product Overview
NEW! DAYTONA "CUBE" DIGITAL LCD SPEEDOMETER + TACHOMETER, 80920
The DAYTONA “CUBE” is a new digital Speedo and Tacho all in one unit. The housing is machined alloy, and unlike the traditional round gauges we offer, the “CUBE” is unique being square! Besides the unique shape, one of the cubes features is the compact size. measuring only 50 x 50 x 25mm. You will be able to easily mount or integrate the “CUBE” into your custom build. To complete the look, the housing has a durable anodised black finish.
The kit comes supplied with a stainless mounting bracket or you can mount it as you like. Also included is additional wiring and setting switches that you use to set the gauge functions. As the gauge has no rear buttons, so we suggest adding the DAYTONA CNC toggle switches for frequent scrolling of the functions (or mount the supplied switches in a handy location on the bike).
Check the product video's tab below for detailed run through and set up of the CUBE!
Features:
- Aluminium housing, black anodized
- Compact size 50x50x25mm
- Speedometer: 0-399 km/h or 0-250 MPH
- Voltmeter: 8-18V
- RPM meter: 0-10,000 rpm or 0-20,000 rpm
- Odometer: 0-99,999km (mile)
- Waterproof
- Trip meter 1&2: 0-9,999.9km (mile)
- ECE approved
Product contents,
- "CUBE" main gauge unit × 1
- Bracket (Stainless) x 1
- Extension wiring harness Set × 1 (9pcs)
- Hexagon Bolt × 2 (M5)
- Washers × 2 (M5)
- Spring Washers x 2 (M5)
- Resistors 1M/Ohm x 1
- Hex Wrench x 1
- Instructions, general use - English
Detectable ignition options:
- 1P 1R: 1 Pulse per 1 - revolution
- 1P 2R: 1 Pulse per 2 - revolutions
- 2P 1R: 2 Pulses per 1 - revolution
- 30P 1R: for 2000 ~ up Harley Davidsons Only
*1 rotation / 30 pulse output is a method used on some Harley-Davidson models. Used when inputting a pulse signal from the crank position sensor.
Functions and extra details:
1) *The "CUBE" is suitable for electric speedometer equipped bikes (vehicles that can pick up 0V-5V alternating pulse signals from the vehicles factory fitted speed sensor). *Or with bikes using genuine speedometers that are equipped with speedometer cables (mechanical type speedometers can use the gauge if adding a speed sensor such as the proximity sensor or pulse sensors sold separately).
2) *In the case you will require an optional electrical speed conversion sensor/adapter (adapter that converts the genuine speedometer gear drive rotation into a pulse signal) for e.g., pulse converter or proximity sensor, they can be purchased separately in our store.
3) *The CUBE does not have dash lights, in the case you need dash lights, see our selection of LED dash lights sold separately (e.g., Beta, Alpha, Gamma and Universal use LED dash light sets OR select from the dedicated bike model LED sets available for the SR400/500 & TW200 etc.).
4) *The RPM signal is compatible with vehicles equipped with DC 12 V battery with full trigger & CDI ignition. (Points ignition models are not compatible).
Cautions: * This product will only operate properly after initial setting of the speed sensor, ignition system, bar graph wiring & maximum display setting. Use after entering the initial settings as shown in the instruction manual & Calibrate the CUBE as per instructions. Not suitable for bikes with battery-less systems, or 6-volt bikes. Bike must have a solid and stable 12-volt source.
