Product Overview
DAYTONA W650 HANDLEBAR SHIMS, 25.4mm TO 22.2mm CONVERSION, 26752
The DAYTONA handlebar shims are used when mounting φ22.2mm handlebars to bikes fitted with 25.4mm (1”) riser clamps and controls (AKA 25.4mm to 22.2mm conversion). By fitting to the handlebar clamp of the riser, and controls, your 22.2mm bars and controls can be converted from 25.4mm to 22.2mm.
W650 have unique bars, and we sell many direct fit options for them, however when fitting 22.2mm clip on bars or your favorite handlebar bend which is only available in a 22.2mm bar, then these shims are and essential item for your build.
The shim set is sold in a set of 4 half spacer (halves) which converts two clamps (as shown in the images).
DETAILS:
-> Part No.: 26752.
-> Maker: Daytona.
-> Suits: W650 / Universal.
-> Spacer size: approx. length - 26mm.
-> Material: Steel.
-> Origin: Made in Japan.
-> Use: Converts 1 inch (25.4mm) bars and controls to 7/8" (22.2mm). specifications
ATTENTION:
1. When ordering for the W650, 2 x sets are required when fitting normal riser bars, ( so please order 2 x sets).
2. If fitting clip on bars only 1 x set is needed.
Explanation: When fitting 22.2mm handlebars (instead of dedicated W650 bars), the W650 requires 1 x set of shims for the handlebar clamps (risers), and 1 x set is used with the lever clamps.
*However, if fitting clip on bars to your W650, then you only need 1 x set for the controls as you don't need to worry about risers.
Daytona Japan (Daytona Corporation) has been a leader in motorcycle parts industry since 1972. Daytona provides original and customized motorcycle parts and accessories throughout Japan and to the international marketplace. Daytona’s specialty is R&D to develop original motorcycle parts and accessories which meet the demand in the highly competitive Japanese motorcycle industry and abroad.
