Product Overview
The Triumph (BLACK) ignition switch holder by Two Hands Motorcycles Germany is the perfect solution for discreetly relocating your original ignition switch under the tank of the Triumph Bonneville, Scrambler and Thruxton. The relocation bracket has a minimalist design which harmonizes with the rest of your custom motorcycle. An indispensable part that goes hand in hand with the use of custom headlight brackets when customizing your modern classic. Hardware to relocate the switch is included for an easy fit up.
Features:
- Discreet relocation of the ignition switch under the tank
- High-quality stainless steel for enhanced durability
- Compatible for fit up on both sides.
- No cable extension necessary
- Available in a Brushed or Black finish
- Hardware to fit included (not shown in images)
Suits:
*Triumph Bonneville/Thruxton (2001-2015) - Air Cooled models
*Triumph Scrambler (2006-2015) - Air Cooled models
Assembly:
Plug and play makes for a quick and easy fit up and saves on fabrication time. First, the ignition switch is attached to the ignition switch holder using the supplied assembly hardware. Then the nut on the upper, front engine holder is loosened and the bolt is removed. The ignition switch holder is mounted in reverse order on the left or right side and tightly fastened. Now ensure the ignition switch holder is in the desired position and re-tighten the nut at a torque of 80 Nm. The original ignition switch cable harness is removed from the main harness and routed underneath the tank and connected to the ignition switch. Finally, insulating tape should be applied to protect the harness from abrasion and dampness. Once installed, start your bike, and check all functions are operating correctly, if so, your work is done.
Need headlight stays to compliment this part? See our universal headlight selection or see stays shown within the Triumph section.
