Product Overview
GOODS CO. LTD, SR500 "88-99" & SR400 "88-00" INTAKE MANIFOLD, FOR CV-BST CARB, G4-00165
This Goods Co. Ltd replacement manifold is used with the SR400 (88~00) and SR500 (88~99) factory Mikuni BST CV carb (2nd generation type SR, BST). A convenient repair / replacement item that is needed when your original manifold gets old, perished and leaks air. Supplied with the replacement gasket for quick and easy replacement.
SUITS:
-> Yamaha SR400 (1988 - 2000).
-> Yamaha SR500 (1988~1999)
+ Replaces genuine / OEM: #3GW-13586-00
SIZE:
-> Mounting pitch: 70mm (c to c)
-> Mounting hole diameter: 6.5mm
-> Carb side inner diameter: 39mm
-> Engine side inner diameter: 35.5mm
-> Vacuum hose ID diameter: 5mm
-> Vac: Front-Rear length: 26mm
-> Vac ports: x 1 spigots, (1 x for fuel tap), as shown in image.
INCLUDES:
+ Manifold x 1
+ Gasket x 1
FITTING NOTES:
1. Always clean the engine intake surface to ensure gasket seals correctly.
2. Re-use your original band clamp, tighten sufficiently without over tightening. Excessive tightening can damage the manifold.
OTHER:
+ This manifold is used with a gasket, always replace gasket when fitting a new manifold to avoid air leaks.
+ If you need a replacement gasket or want a spare see part number: 13-40031
+ Replaces factory gasket: OEM #3HT-13556-00 & 583-13556-01
*This manifold is for the factory Mikuni BST CV (Japanese market carb, without TPS). Also known as the second-generation SR carbie (first of the CV carbs) that were introduced between 1988 and 2000 after the VM-ss type carb was phased out in 87. *Note: If you have a carb with TPS, that is the third gen carb, see the 3rd gen manifold sold separately (which has smaller specs).

Established in the (Hyogo) area of Osaka Japan in 2001 as “Motor Garage Goods,” they quickly gained recognition as a sought-after custom bike builder, fulfilling over 1,000 custom motorcycle orders from across Japan.​ Building on this experience, they expanded in 2009 to parts design, production, and sales throughout Japan, offering a wide variety of parts for popular models like the SR400/500, TW200/225, and W650, specializing in Café racers, Chopper, Bobber, and Tracker-inspired builds. In a strategic move in 2009, Goods Co. Ltd entered into an exclusive agency agreement with EMGO for parts distribution within Japan. Continuing their growth, in 2014 they launched a specialized custom parts brand (GleamingWorks.jp) for Harley-Davidson motorcycles, focusing particularly on the XL series.​ VANEM have been proud partners with Goods Co. Ltd. since 2010 and acknowledge them as a long-standing and reliable supplier.