Product Overview
POSH JAPAN "BLACK" MIRRORS TII FOR "YAMAHA THREADS", 9200167-06
The "Type 2 POSH Round Short Stem Mirrors" are one of our most popular mirror options for café racers and custom builds - (and also those who are just looking for a short round mirror). We offer them as a left-hand/right-hand (2-piece) mirror set specifically designed for Yamaha motorcycles with the factory M10 right-hand thread on the left side and the factory M10 inverse thread on the right side.
These mirrors are a favorite among SR400/500 owners and those with similar models like the XS650. Purchasing the set offers approximately 10% savings compared to buying each mirror individually. The mirrors feature a round, 105 mm diameter black body and a 93 mm mirror face. Their black two-bend arm provides excellent side clearance and positioning, making them suitable for both clip-on and riser bar bikes.
These mirrors are a long time seller and were originally offered by famous Kyoto SR shop "Official". Since Official closed the doors POSH Faith has continued with this iconic mirror that complement classic café builds and custom projects alike. POSH have made some improvements over the years, and the mirrors rear stamped logo says POSH (not Official).
INCLUDED: 1 PAIR
-> 1 x RIGHT side mirror with reverse/lefthand thread, 10mm X 1.25, (AKA: an inverse type of thread).
-> 1 x LEFT side mirror with normal righthand thread (10mm x 1.25mm - normal RH thread).
DETAILS:
-> Material: Steel, Satin Black finish
-> Mirror size: Φ105 mm body, 93mm mirror surface
-> Arm Length: Suits Medium to Short set up
-> Made in Japan
ATTENTION:
+ This set of mirrors are for Yamaha genuine threaded mirror mounts! Yamaha and several other makers (KTM etc.) use a reverse thread on the RIGHT side (AKA: Inverse thread). You should always check that your bike has factory threads (RH thread on the LHS) and (LH/INVERSE thread on the RHS) to ensure these mirrors suit your bike.
+ The right mirror can't be fitted to a normal M10 RH thread obviously, so if your bikes has had the mirror mounts changed at some stage in its life, or if it has had the brake lever or master cylinder changed, it is possible these will NOT be compatible. If your bike has RH threads (normal M10 RH threads) then we sell the M10 mirrors for the RHS and LHS, see our separate listing for 920015-10 & 920017-10.
+ As always, lube the threads before fitting (grease or anti seize lube), and DON'T over tighten. Simply position mirror arm and pinch up the nuts tight (no need to swing off the nuts).
