Product Overview
DAYTONA / NISSIN clutch master cylinder switch connector (coupler), 29968.
The DAYTONA/NISSIN clutch master cylinders use a 3-pin type wiring coupler. A conversion harness may be required for the flat-terminal type harnesses that connects to the switch for the clutch master cylinder, (depending on your bike model). With this handy pre-made harness set, your original 2-pole flat terminal (on the bike side) can be easily converted to a 3-pole coupler on the master cylinder side when fitting a new Daytona/Nissin clutch M/C.
Includes:
- Coupler 3 P type
- Wiring as shown
Matches with our DAYTONA/NISSIN clutch master cylinders.
Note:
- This harness set does NOT fit the Nissin/Daytona brake master cylinders. It is for the clutch side ONLY.
- If you need terminals for the brake M/C, ask about the available options for DIY.
- We have the required terminals available for the brake side.
