Product Overview
HONDA REBEL/CMX 250/500（’2020～’2023), VELONAΦ60 TACHOMETER KIT, 39914
The DAYTONA REBEL 250/500 VELONA tachometer kit It has been renewed and is now compatible with '20~'23 model! The Daytona VELONA Tacho kit is one of the most popular options you can add to your REBEL! Designed to be a bolt-on kit using a dedicated REBEL / CMX tachometer bracket and wiring set to suit. Tachometer is well place by being installed in the upper left corner of the stock Speedometer for easy visibility. And as the high-quality stepping motor Daytona Tachometer is supplied with a black body, it matches the atmosphere of the REBEL 250/500 (CMX).
The meter displays 9000 rpm for easy viewing in the normal engine rpm range. To finish the kit off, the meter stay uses a rubber mount to prevent vibration.
Suits:
- Rebel 500（’20〜’23）(CMX)
- Rebel 250/SE（’20〜’23）
- RE: φ60mm/9000rpm display – see notes below
Features:
- This set allows you to easily install the VELONA tachometer specific to your bike model.
- The VELONA 60Φ display is 9000 rpm, which is easy to see in the normal usage rpm range.
- Meter stays are rubber mounted to prevent vibration.
- Coupler-on (plug and play) design with no difficult wiring.
- Tachometer is ideally placed and matches the factory Speedo.
- The DAYTONA Aero visor and Blast barrier kits can be installed at the same time.
- It is possible to install the DAYTONA multi-bar holder at the same time.
- Stepping motor-driven tachometer.
- Maximum RPM memory and recall.
- Voltmeter meter range: 0-18.0 volts (on LCD).
- Back light display is LED lit (white).
- Shift up warning light on dial (Red LED) - desired rpm range is selectable.
Included:
- VELONA Tachometer Set x 1 (60mm)
- Power outlet harness x 1
- Tachometer harness x 1
- ※ Relay (Panasonic) x 1
- Tachometer Stay x 1
- Stepped collars and Rubber dampers (2pcs each)
- Cap bolts & Flat washers M 5 (2pcs each)
- Button bolts and Collar M8 (1pc each)
- *Complete English instructions when bought from VANEM!!
- ※It is not used for ('20~'22) REBEL250/500.
This short video is just for product information and is an example of product use.
Attention:
* In reality, the engine of the Rebel/CMX rotates up to approx. 10500 rpm. However, the 9000-rpm tacho has been used to prioritise visibility in the normal usage range. Engine rotation above 9000rpm will not be displayed.
* It is not completely waterproof. Due to the temperature difference inside and outside the meter (and humidity), the glass surface may condense and become cloudy, but it is not abnormal. Just sit in the sun and it clears.
* Since the tachometer is a non-disassembling structure, it is impossible to repair.
