Product Overview
DAYTONA HONDA GB350 / GB350S, "LOW STYLE HANDLEBAR", STEEL, BLACK, 95365
The high quality Japanese made Daytona "Black low handlebar" for the Honda GB350/GB350S (2023~) is designed with an ideal bend to keep you from feeling cramped or stressed while riding, and as the grip position is 15mm lower than the genuine factory handlebar, the position is tilted inward towards the front, creating a moderate forward-leaning posture for a sporty feeling. Whilst the spec change is minimal, the bend and seated position are enhanced for most users.
Being a dedicated GB bar, the ends of the bars are fitted with bar slugs (weights) that are pre-drilled with 6mm threaded holes, this allows you to easily install M6 size bar end mirror adapters, bar ends or the OEM (factory) bar ends (from 23 onwards models). No changes to the control specifications are required as the design falls within the +/- 40mm in height and +/- 20mm in width, so existing cables and brake line are a straight swap over.
Use as an upgrade, or on your custom GB when requiring a lower stance.
SIZE: (Always check specs carefully to ensure bars suit your bike and needs)
-> Dia: 22.2mm diameter (7/8")
-> Total width: 705mm wide
-> Height: 45mm high
-> PB: 125mm pull back
FEATURES:
+ High strength construction - made of steel.
+ CNC mandrel bend processing, with a high-quality matte black finish.
+ A dedicated GB350 / GB350S - 22.2mm bar.
+ Inner bar weights installed to reduce vibrations (approx. 90g per side).
+ M6 type bar ends, and bar end adapters can be securely fitted with M6 bolts.
+ Bars have predrilled switch block location holes drilled for factory GB switches.
+ Punch mark for installation position.
+ Made in Japan.
NOTE:
1. Bars are a dedicated GB350/S bar. However, they can be used as a general-purpose (universal 22.2mm) handlebar on other models. Keep in mind switch hole locator holes are predrill for the GB, that may or may not be ideal for general purpose use.
2. To install, keep in mind pre-drilled holes for the left and right switch boxes and position notch is pre applied, if using non-genuine switches consider your aftermarket switch width to see if they cover holes etc. etc.
Daytona Japan (Daytona Corporation) has been a leader in motorcycle parts industry since 1972. Daytona provides original and customized motorcycle parts and accessories throughout Japan and to the international marketplace. Daytona’s specialty is R&D to develop original motorcycle parts and accessories which meet the demand in the highly competitive Japanese motorcycle industry and abroad.
