Product Overview
GOODS CO. LTD “CLASSIC FLAT TRACKER STYLE HANDLEBAR”, 22.2MM / 7/8", CHROMED, G1-00130
The GOODS CO. “CLASSIC TRACKER STYLE HANDLEBAR”, is a new product for Goods Co. (late 2025). We have sold Dirt Tracker (Flat Tracker) style bars handlebar for many years due to their popularity for Tracker style builds, and the NEW Goods Co. chrome F/T bar doesn't disappoint!
The chromed 812mm wide Flat Tracker bar can be used on many bike models that require 22.2mm bars (7/8"). They are mainly for Tracker inspired builds, or custom builds. Or you could use as an OEM replacement (on early SR or XS650 etc.). Commonly used on the SR400/500, XS650, TW200, TW225, W800 & (W650 if you add shims). This bar style is popular not just for its bend and style, but also because it is a quality Japanese made handlebar!
Beside use on classic Japanese model's, this bar spec is also often used on classic and modern Triumph models and custom Royal Enfield's (with 22.2mm spec). Made in Japan with seamless steel tubing, (mandrel bent) finished in high-quality chrome plating and stamped with the Goods Co. logo to authenticate!
SPECS: (specs are approx.)
-> 812mm Wide
-> 126mm High
-> 242mm Pull Back
-> 128mm base (clamp) area
-> OD: 22.2mm, (7/8”)
-> ID: 18mm
FEATURES:
-> Made from high strength steel.
-> High-quality Chromed finish.
-> Reminiscent of the Dirt Tracker style bars.
-> A universal use bar, suitable for many bike models.
-> Made in Japan to ensure quality is maintained.
![]()
*TW200/225,
You will need to use +100mm cable set when using on the TW200/225. TW owners ask about our available cable sets!
W650 AND W800,
W650 owners will require shims to use these bars. You can then use the High Bar spec cables and brake line. W800 owners will need to use our long cables listed for the W1 bars (throttle, clutch and brake line).
*SR400/500,
If you are swapping from an SR400/500 (later) model that needs longer cables, typically you will need cables that are in the +120mm to +200mm range (it varies depending on the cable function). For early model bikes if you are simply doing a full refresh or custom build, we have "DAYTONA - Flat Tracker" compatible long cables, on older bikes with early big bars some cables may not be needed, but later bikes well-definitely require cables!
Check the Daytona cable recommendations below. Shown is STD length and then required/recommended length. See the year model data listed on the images (blue section).
Cables and Brake line STD quoted lengths are approx. lengths are from our data. However, always check lengths for your specific needs.

- De-Comp: STD = 671mm > change to: +120mm (p.n 22356)
- Clutch: STD = 975mm, > change to +150mm (p.n 22357)
- Brake Cable: STD =1080mm, > change to +200mm (p.n 22358)
- Throttle: STD Push = 1010mm, STD Pull = 1060mm > change to: +120mm (p.n 22355)
- Wiring harness: > No change (use original)

- De-Comp: STD = 671mm > change to: +120mm (p.n 22356)
- Clutch: STD = 975mm > change to +150mm (p.n 22357)
- Brake Line: STD =780mm, > change to +220mm (p.n 60578) *1000mm A spec
- Throttle: STD Push = 990mm, STD Pull = 990mm > change to: +120mm (p.n 39885)
- Wiring harness: > No change (use original)
![]()
SR400/500 (78-84): DISC BRAKE
- De-Comp: STD = 750mm > change to: +120mm (p.n 22356)
- Clutch: STD = 1085mm > change to +150mm (p.n 22357)
- Brake Line: STD =950mm, > change to +50mm (p.n 60598) *1000mm D spec
- Throttle: STD Push = 1090mm, STD Pull = 1090mm > use STD or change to: +100mm (010131-A1)
- Wiring harness: > No change (use original)
SR400/500 (85~87): DRUM BRAKE
- De-Comp: STD =750mm > change to: +120mm (p.n 22356)
- Clutch: STD = 1085mm > change to +150mm (p.n 22357)
- Brake Cable: STD =1050mm, > change to +200mm (p.n 22358)
- Throttle: STD Push = 1090mm, STD Pull = 1090mm > change to: +100mm (010131-A1)
- Wiring harness: > No change (use original)
![]()
ATTENTION:
1. Please see specs above for details.
2. This bar is 22.2mm. If using on the W650, you will need to purchase shims separately, (2x sets are required for the W650). W650 can use early 99-00 type cables (or long cables sold in store).
3. Due to the size and width of this bar, you may require longer cables, and brake line depending on your bike model and year model.
4. Bars are a general-purpose handlebar. To install, it might be necessary to drill a hole for LHS / RHS switches or notch the bar, (eg: W650/800 etc.).
5. As these are a universal bar, please check the specs above and ensure these will fit your clamp width, throttle, use & application etc.
6. If you have a bike with 1inch bars and require 25.4mm (1") to 22.2mm (7/8") shims, see our handlebar shims (26752).

Established in the (Hyogo) area of Osaka Japan in 2001 as “Motor Garage Goods,” they quickly gained recognition as a sought-after custom bike builder, fulfilling over 1,000 custom motorcycle orders from across Japan. Building on this experience, they expanded in 2009 to parts design, production, and sales throughout Japan, offering a wide variety of parts for popular models like the SR400/500, TW200/225, and W650, specializing in Café racers, Chopper, Bobber, and Tracker-inspired builds. In a strategic move in 2009, Goods Co. Ltd entered into an exclusive agency agreement with EMGO for parts distribution within Japan. Continuing their growth, in 2014 they launched a specialized custom parts brand (GleamingWorks.jp) for Harley-Davidson motorcycles, focusing particularly on the XL series. VANEM have been proud partners with Goods Co. Ltd. since 2010 and acknowledge them as a long-standing and reliable supplier.