Product Overview
DAYTONA YAMAHA PULSE CONVERTER, DRUM, 18mm INSERT, 87041
The DAYTONA Speed Pulse Converter J1 (Dia 18 mm) insert type is designed for use with DAYTONA VELONA gauges, DAYTONA original electrical gauges, DEVA-01, and the Daytona CUBE. Its convenient 18mm insert size is primarily used on the SR400/500 and other classic Yamaha models equipped with drum brake speed drives. Featuring an 18mm fitting diameter, the converter has a durable alloy body and O-ring for quick and easy installation. Simply remove the factory speedo cable, grease the O-ring and drive fitting, and reinsert it into the cable hole. Secure it in place with the factory cable clip.
This speed pulse converter transforms the mechanical speedo cable movement into an electrical pulse signal. It is commonly used on SR400/500 models with a front drum brake, providing a plug-and-play solution when upgrading to an electrical gauge. And with a wire length of approximately 1800 mm it has ample length for neat routing up the fork leg.
For convenience, the wires are pre-fitted with bullet connectors (c 104 type).
SPECS & DETAILS:
-> Fits: SR400/500 Drum brake (replaces speedo cable) & Similar models.
-> Outer Diameter: Día. 18 mm Insert type - (diameter - 18 mm), J1
-> Wire length: 1800 mm
-> Suits: Use with all VELONA and DAYTONA gauges.
-> Insert Dia: 18mm (17.9mm, 18mm at the O-ring).
-> Insert Depth: 13.35mm to 13.4mm (approx.)
-> Inner cable square drive end: 2.5 x 2.5mm
-> Square drive end length: from machined fitting end is approx. 15mm, (*when measured into the base recess its approx 21mm)
COMPATIBILTY:
The list below shows some possible models this speed sensor fits. This may change from region to region and more models may be suitable. This list is a a guide only and you should check your current Speedometer cable (or speed sensor) to ensure this product is the correct size for your model prior to purchase. Confirmed use on SR400/500, XS650.
+ SR400 with front Drum Brake (direct replacement for Speedo cable)
+ SR500 with front Drum Brake (direct replacement for Speedo cable)
+ Other Yamaha models with the 18mm x 13.4mm insert type Speedo cable (XS650/TW200/XT, RD models etc.)
NOTE:
These sensors are a three-wire type and not compatible with two wire feeds used on other gauges. (sensor is NEG switching). Always check the details and specs for compatibility. Use with Daytona and Daytona VELONA electrical gauges.
Daytona Japan (Daytona Corporation) has been a leader in motorcycle parts industry since 1972. Daytona provides original and customized motorcycle parts and accessories throughout Japan and to the international marketplace. Daytona’s specialty is R&D to develop original motorcycle parts and accessories which meet the demand in the highly competitive Japanese motorcycle industry and abroad.
