Product Overview
DAYTONA Speed Pulse Converter, Meter cable / gauge mount type - (Universal). This type of sensor can have your original speedo cable attached to it (M12). A cap is supplied to blank off the other side. Or it can be attached in line with some mechanical gauges to supply a separate feed for an auxiliary gauge or use it to give a speed sensor feed when you remove or replace a factory speed sensor (see notes for SR400 below).
- Twin function
- Suits gauges / cables with a M12 thread
- Wire length - 650mm, with bullet connectors
- Use with all VELONA and DAYTONA gauges.
Note: These sensors are a three-wire type and not compatible with two wire feeds, use with DAYTONA gauges.
Use example for VELONA and SR400FI.
If using an aftermarket mechanical gauge on the SR400FI (such as the Daytona 2040 180km/h speedometer), you can install this twin function sensor to the new mini meter (mechanical type) then connect the Speedo cable as normal (fits inline). Gauge will run as normal with mechanical cable, and you can then feed the ECU speed sensor signal from the pulse wire of the twin function speed sensor - (which is required on the SR400FI as they have an inbuilt speed sensor within the factory gauge - 2010 - 2018 models).
Alternatively, use with M12 fitted OEM gauges to obtain a pickup signal for side mount electrical Speedos.
Use on models that other speed sensors are not available for - older Japanese models with M12 speedo fittings as an example.
RELATED: Need SR400FI LED warning lights when fitting an aftermarket gauge?
We stock LED dash light kits for the Japanese imports (FI) and AUSTRALIAN FI models. Plug & play.
We can wire in the speed sensor wire into the dash light set to make a complete hook up as easy as possible.
