Product Overview
DAYTONA VELONA60, BLACK DIGITAL TWIN FUNCTION SPEEDO/TACHO, Km/h & MPH, C.E. & E MARKED, 85836
The VELONA60 all in one #85836 is a "digital" gauge with a φ60 mm diameter body. It has a compact size with a low height of 43 mm and is fitted with a neo classical style spherical lens. The style of this gauge will suit a range of bikes and styles. It can modernize a classic build or fit in with a later model bike. The display has speed and an rpm bar graph tachometer.
The vehicle speed signal can be picked up from a genuine electric speedometer speed sensor (on suitable models with a 0 V-5 V alternate pulse signal from a vehicle speed sensor) or fit it up with the use of a mechanical speedometer pulse sensor sold separately (see our full range on offer) or simplified fit up with the proximity sensor that is also sold in store. The RPM signal is compatible with vehicles equipped with DC 12 V battery with full trigger & CDI ignition. (Points ignition models are generally not compatible).
CERTIFICATION:
The VELONA 60 DIGITAL is ECE approved (ECE-R10) & (C.E.) certified to meet strict Euro requirements for road use.
CONTENTS:
- Meter body × 1
- Power harness × 1
- Earth harness × 2
- Speed sensor harness × 1
- RPM sensor harness × 1
- V-bracket × 1 (chromed steel)
- Hexagon Bolt × 2
- Washer × 2
- Bullet connector terminal CA104 × 1
- Open type terminals × 2
- Wire quick tap type connector × 4.
- Instructions, general use - English
DISPLAY:
1. -> Speedometer display: 0-399km/h or > (0-250mph)
2. -> LCD Monitor display can be switched between - ODO / TRIP1 / TRIP2 / RPM
Odometer (ODO): 0-99,999 km (mile), not re-settable
Trip meter (TRIP 1 / 2): 0-9,999.9 km (mile) dual display
Rotation speed display (rpm): 0-20,000 rpm
3. -> Bar graph display - The rotation speed is displayed in a bar graph.
4. -> Maximum rpm display value: 4500-20000 rpm (Upper limit can be set arbitrarily between 4500 and 20000 (in 500 units).
IGNITION OPTIONS:
- 1 rotation / 1 ignition
- 2 rotations / 1 ignition
- 1 rotation / 2 ignitions
- 1 rotation / 30 pulse output
* (Note 1) 1 rotation / 30 pulse output is a method used on some Harley-Davidson models. Used when inputting a pulse signal from the crank position sensor.
FUNCTIONS / EXTRA DETAILS:
- The Digital gauge instructions can be found above in the main images.
- Gauge unit is suitable for electric Speedo equipped bikes (using a 0V-5V alternating pulse signals from the vehicles factory fitted speed sensor).
- Or older model bikes using genuine Speedometers that are originally equipped with speedometer cables (mechanical type speedometers). In this case you will require an optional electrical conversion adapter (adapter that converts the genuine speedometer gear drive rotation into a pulse signal) for eg. pulse converter or proximity sensor.
- Meter body is φ 60 mm in diameter.
- Mounting width at the bracket is 45 mm.
- Speed sensors can be purchased separately in our store.
OPTIONAL PARTS:
To compliment the great VELONA gauge range, VANEM stocks many optional add on products to help you get the job done. From the many variations of dash light units, anti-vibration stays with different offsets and angles & essentials like speed sensors, wiring and switches, VANEM has you covered with all of your needs to get the job done like a pro!
CAUTIONS:
* This product will only operate properly after initial setting of the speed sensor, ignition system, bar graph wiring & maximum display setting. Use after entering the initial settings as shown in the instruction manual. Not suitable for bikes with battery-less systems, or 6-volt bikes. Bike must have a solid and stable 12-volt source.
