Product Overview
DAYTONA SR400/500 STAINLESS REAR HALF FENDER "KIT", WITH OUT /TAILLIGHT, 15727.
The DAYTONA rear stainless half fender kit is recommended for FI models SR (10~18) that are difficult to modify around the airbox area (AKA Ska Tune - Suka Tune). Due to the fuel pump arrangement on the SR400FI typically the air box is left in place with the FI model. *However, this kit is suitable for all year model SR's (SR400/500).
Therefore the fender kit can also be used on Carbie models without issue. In that case it can be installed with the inner factory fender (as per the FI suggestion) or when using the rear frame mud guard / flat panel (common on Tracker builds). Length is well-balanced for normal seats and suitable for a range of double / aftermarket custom seats. Since it uses an inner fender together, it is also resistant to mud splatter etc.
DETAILS:
- Material: Stainless steel with a polished finish. Brackets are steel - chromed
- Length: Fender is slightly longer when compared to the stainless rear fender (39147/45218) - (> approx. 35mm longer)
- Suits: SR400 / 500 ('80 ~ '08) & SR400 ('10 ~ '19) FI
- Other: Tail lamp mounting holes have been pre drilled / machined on the fender for easy installation
- Recommended: For use with adjustable tail lamp kit (45139/45140) and Cast alloy taillight kit (93020)
NOTE: If using the above matching taillights, it is recommended to add a reflector kit #(which are sold separately).
