Product Overview
DAYTONA RETRO HEADLIGHT BRACKETS - BLACK, 41MM, 86942
The DAYTONA retro headlight brackets are a long-time seller from Daytona dating back to the early 2000's. They were then re-made several years ago due to demand when the CEV replica headlight was again released. The steel retro type headlight brackets are a popular choice with the CEV replica headlights, but they also suit a wide range of side mount headlights such as the Cafe 7" headlights (AKA Lucas style). Clamp is secured with two stainless bolts at the clamp. The 41mm (+/- 1mm) headlight brackets suit 41mm fork clamps on models such as the Triumph Bonnie, Scrambler, Thruxton and HD models with 41mm forks (just as an example).
Sold here for the 41mm forks, but they have some scope to be adaptable and clamped down or shimmed down. The 41mm have the spacers fitted, this suits several HD models, and brackets can be fitted facing in or out to change spacing to the light. Finished with a Black electroplate finish.
Fit facing upwards or downwards - depending on the headlight height requirements or headlight being used with these brackets.
- Fits: fork tubes with a diameter of 41mm
- Length: Approx. 118mm
- Included: 2pcs (LHS / RHS set)
- Headlight hole: 8mm
- Material: Steel
Approx. Length: From the centre of the fork tube to the centre of the HL bolt hole is 118mm. *This is a rough guide only, depending on measurement method.
Suitable for:
- HD Softtail Models (Harley Davidson 41mm fork models)
- Triumph Bonnie, Scrambler & Thruxton
- Honda REBEL (CMX) with 41mm forks
- And all bikes with 41mm forks tubes
Note: Some image here are for illustration purposes only, Headlight stays are BLACK, as per image 1 & 2
