FREE DELIVERY WITHIN AUSTRALIA FOR ORDERS "$250 AND OVER - (*CONDITIONS APPLY)

DAYTONA BATTERY LESSER SR400/500 & TW200, 77585

DAYTONA

(No reviews yet) Write a Review
$67.97
SKU:
77585
Availability:
In stock
Bike Model:
SR400/500 & TW200, TW200E
Adding to cart… The item has been added

Product Overview

DAYTONA BATTERY LESSER SR400/500 & TW200, 77585

The DAYTONA battery lesser is made with a large-capacity capacitor (approx. 6,800μF). It can be used on single-cylinder bikes that are 125cc or more, that do not have an electric starter (kick start only). The battery lesser are for 12V models only. The DAYTONA battery lesser are commonly used on the SR400/500’s which help's shed bike weight (due to battery removal), and it also allows for fitment of “SKA TUNE KITS” (open rear frame without the battery box). They are also often used on the TW200, in which case the electric starter will not work, *you need to use the kicker!

Typically fitted to the battery harness panel or electrics plate, if you need a harness/electrics panel, see our separate listings.

Suits:
SR400 (78~92)
SR500 (78~92)
TW200 (~ 98), TW200E (98~00), TW200E (2000 model)
Other model compatible 12v models with CDI ignition

Vehicles that are Not compatible with battery lessors:
6V models
Bikes that have electric start only
Bikes with regulators in poor condition, such as old unrestored bikes
SRs built after 1992 > for example SR400('93~), SR500('93~), SR400 ('01~),
And SR400FI ('10~18) (3HTR) * Injection does not work.

Attention:
This product stores voltage instantaneously, and it does not have performance like a battery. After installing the battery lesser, the lights may become dull or the horn may not sound when used while bike is idling, but that can be solved by increasing the engine RRP, *so this situation is not abnormal or a problem, it is common for battery lesser.

Caution:
After installing the battery lesser, when the engine is stopped, the lights do not light up even if the main switch is turned on. The bike must be running for functions to work. Keep in mind, if you stall the engine, the lights will not work, so this product is recommended for off road use or racing use only.

Installation:
* For installation, wiring processing is required (such as fitting the supplied terminals). Kit is supplied with suitable terminals for the SR and TW’s (not shown in image, but they are included). *Second image shows the old version fitted (RED), unit is now black as shown in main image.

daytonadeitona-black-4.jpg

Reviews

(No reviews yet) Write a Review