Product Overview
DAYTONA "CLASSIC ROUNDED" ENGINE PIPE GUARD, HONDA GB350C/GB350, "UPPER KIT", 46201
Daytona's Honda GB350C / GB350 "Classic Rounded" upper engine pipe guard is designed primarily for use on the GB350C. While it can be installed on the other models, the styling is aimed at the C modes classic lines. Also, this version is gloss black to match the GB350C models gloss frame.
Made of Φ25.4mm (1”) steel pipe for added strength. The pipe layout provides both bike protection and a comfortable riding position on winding roads and highway use while minimizing the overhang. The pipe guard design reduces damage to the engine & fuel tank in the event of minor falls such as standing / or parked falls and can also help prevent the rider getting pinned under the bike.
The paint is finished in a gloss black that matches the GB350C frame, and the paint is weather resistant. (*If wanting the matte finish for the GB350/GB350S, see the other kits we offer). Being 25.4mm in diameter also allows you to fit many widely available (25,4mm / 1") mounting clamps for various add on accessories such as additional fog lights, camera mounts as an example. And finally, the pipe guard is made in Japan to ensure quality.
See below video preview tab for an overview of the GB350 Daytona products (in Japanese so turn on auto captions English).
COMPATIBILITY:
+ Honda GB350C（'24~）＜8BL-NC64＞ (best suit to the C model!!)
+ Honda GB350 ('21~'24) < 2BL-NC59/8BL-NC59>
+ Honda GB350S ('21~'24) < 2BL-NC59/8BL-NC59>
FEATURES:
-> 25.4mm pipe size for a strong construction.
-> Upper engine pipe guard kit has a wide design to help protect the engine, tank etc.
-> Gives clearance between the rider and the bike in the case of a fall & helps avoided getting pinned down.
-> "Gloss" Black painted finish.
-> Handy mounting point for fog lights or accessories (such as dash cams) etc.
-> Can reduce damage to the engine and radiator in the event of a bike falls.
-> Spare parts can be ordered if parts are damaged (such as LH or RH pipe guard only).
-> Made in Japan.
-> Complete bolt on kit. Supplied with Japanese instructions (*English guide is currently being prepared!).
NOTES:
-> Can-not be fitted at the same time as the lower pipe guard kit 22102.
-> Since this product is painted black (gloss black), the paint may chip due to heavy stone chips or protective covers that are unsecured when storing the motorcycle may rub and scratch the finish etc.
-> In the event of hard fall or accident, the product may be damaged or scratched if the impact is harsh. However, spare parts are available for repairs so there will not be a need to replace the entire kit (LH / RH pipes sold separately, Hardware sold separately - for repairs).
Daytona Japan (Daytona Corporation) has been a leader in motorcycle parts industry since 1972. Daytona provides original and customized motorcycle parts and accessories throughout Japan and to the international marketplace. Daytona’s specialty is R&D to develop original motorcycle parts and accessories which meet the demand in the highly competitive Japanese motorcycle industry and abroad.
