Product Overview
TANAX 10MM YAMAHA TYPE MIRROR THREAD ADAPTERS, BLACK, H10, 2pc SET.
The Tanax (Yamaha type) mirror adapters are for mounting mirrors with M10 x 1.25mm (RH) threads to bikes that have RH thread (positive) on the left side, and Inverse (reverse) thread on the right side, this is common to most Yamaha models and some KTM models. While we do sell many mirrors with Yamaha threads or adapters, some mirrors are only available with normal (positive) 10mm threads, so by using these adapters it will allow you to expand the range of mirrors available to your bike and use mirrors with normal 10mm x 1.25mm threads. Perfect for customization or simply use for OEM replacements.
Details:
- For Universal use: (eg: Yamaha's with 10mm threads).
- Bike side left mirror:M10 Positive (RH) normal thread.
- Bike side right mirror: M10 Inverse (LH) reverse thread.
- Mirror side: suits M10 positive (RH) thread - P1.25mm.
- Height: 20mm.
- Material: Steel, black painted finish.
Screw diameter / direction:
- Contents – 1 set = 2pc
- 10 mm positive screw → 10 mm reverse screw, 1pc
- 10 mm positive screw → 10 mm positive screw, 1pc
- For: Yamaha inverse to RHS mirror use
Notes:
Some mirrors may have threads are too long for the adapters. Check specs above.
Always check your bike has original factory (RH thread & Inverse thread) and mirror mounts are 10mm.
Always grease the threads (inside adapters and when mounting to the bike), with anti-seize grease.
Do not over tighten the adapters or mirrors when mounting as that can damage threads or mirrors etc.
