NISSIN CLUTCH M/C WIRING CONVERSION COUPLER 3P, 29968

DAYTONA / NISSIN CLUTCH MASTER CYLINDER, SWITCH CONNECTOR / COUPLER, 29968.

The DAYTONA/NISSIN "clutch master cylinders" use a 3-pin type wiring coupler. A conversion harness may be required for the flat-terminal type harnesses that connects to the switch for the clutch master cylinder, (depending on your bike model). So, with this handy pre-made harness set, your original 2-pole flat terminal (on the bike side) can be easily converted to a 3-pole coupler on the master cylinder side when fitting a new Daytona/Nissin clutch M/C. 

INCLUDED:
-> Coupler 3 P type (converts to 2 pin)
-> Wiring as shown with bullet connectors

Matches with our DAYTONA/NISSIN clutch master cylinders. 

NOTE:
1. This harness set does NOT fit the Nissin/Daytona brake master cylinders. It is for the clutch side ONLY.
2. If you need terminals for the brake M/C, ask about the available options for DIY.
3. We have the required terminals available for the brake side.

Daytona Japan (Daytona Corporation) has been a leader in motorcycle parts industry since 1972. Daytona provides original and customized motorcycle parts and accessories throughout Japan and to the international marketplace. Daytona’s specialty is R&D to develop original motorcycle parts and accessories which meet the demand in the highly competitive Japanese motorcycle industry and abroad.

All DAYTONA products purchased directly from VANEM are backed with a 12-month manufacturer's warranty within Australia to the original purchaser, and a 30-day returns policy. Please see our warranty and return pages for full details. Warranty information can be found in the terms-of-use page & Returns is within shipping and returns. Excludes parts that have been modified, bent, welded or used incorrectly.