Product Overview
GB350/S CLIP ON HANDLEBAR "FULL KIT", MATTE BLACK, 42411
The Daytona GB350/S "Matte Black Clip-On Bar Kit" is a comprehensive, all-inclusive package designed specifically for the Honda GB350 and GB350S (2023~2025-year models). This kit includes everything required for a seamless clip-on conversion. Featuring a machined top bridge, fixed-angle straight alloy handlebars, a bar limiter, and shorter control cables. The handlebars are not too low, allowing for a comfortable position even on long rides. They can be locked as normal and comply with safety regulations in Japan (steering can be locked). The included short cables keep the area around the handlebars neat and tidy.
The Daytona stainless steel brake line manufactured by Nichirin a leading brake line manufacturer in Japan. This line is fully compatible with the ABS system and provides a performance upgrade over standard rubber lines. Additionally, the control cables feature stainless steel inner wires with a sleek black outer casing. All components are manufactured to the highest quality standards.
If looking to add bar ends or bar end mirrors, the alloy bars have a 16.5mm internal diameter, allowing for the installation of compatible bar ends if desired.
With this kit, you can now build your cafe racer, or custom without expensive one-off fabrications or hunting for compatible parts which can be time consuming to pull together!
INCLUDES:
-> 1 x Machined alloy Top Bridge, (Matte Black).
-> 1 x Handle clamp (LHS), 41mm, (Matte Black).
-> 1 x Handle clamp (RHS), 41mm, (Matte Black).
-> 2 x straight handlebars, *predrilled for GB switches, (Anodised Black)
-> 1 x throttle sleeve, smooth type (for easy grip install).
-> 1 x Handlebar limiter, w/bolts.
-> 1 x "Short" clutch cable (-100mm).
-> 1 x "Short" Throttle cable "set" (-60mm), push / pull set (2pcs).
-> 1 x "Short" brake line upper (-80mm), stainless.
-> 1 x Brake line lower, stainless.
-> 4 x Brake line washers.
-> 2 x Collar - (9 x 15 x 5).
-> 2 x M8 x 20 - button head bolts.
-> 4 x M6 x 20 - cap head bolts.
-> 4 x M8 x 20 - cap head bolts.
-> 4 x M8 x 30 - cap head bolts.
-> 8 x cable ties.
-> 2 x Spacer - (8 x 16 x 1.2).
+ Full 32-page English instructions included when purchased from VANEM (NOTE: the instruction set is not offered elsewhere. This guide is only available within this kit when purchased from us VANEM). Kits sold elsewhere have Japanese only.
OPTIONAL PARTS:
This set includes all of the essentials, however, keep in mind you may also require odds and ends such as new grips, bar ends if grips are open ended. Also consider your mirror placement and usable angle of mirrors. We recommend using shorter shocks to obtain a lower stance and that cafe racer / custom look!
If wanting to install the Daytona Tachometer, please see the special tachometer mounting kit 29848. Part number 29484 is made to fit this kit and the VELONA48 tachometers.
If you need new grips, bar ends or bar end mirrors to compliment your installation, check our full range of grips, mirrors and bar ends in store, we have parts to match this set and finish you bike like a pro!
ATTENTION:
1. Fit up is for experienced users, or by mechanics, and kit is made for stock bikes.
2. If you are new to customising keep in mind the brake bleeding and cable adjustments need to be done correctly for safety.
3. *Changing any component on your brake system requires a high level of experience. This line should only be fitted by a licensed qualified mechanic. Brake system will require bleeding before use.
4. Cables should be lubed at time of fitment. Fitting should be carried out by a qualified experienced mechanics as per the factory workshop manual and instructions.
5. Cables and functions should always be tested before use on road to ensure the return function of throttle and function of the other cables is uninhibited and that the cables have the correct free play & adjustment.
6. Always use the new gaskets (washers) when fitting the brake line and ensure your banjo bolts are correct size to match the banjo fittings.
7. Kit is compiled for factory fitted bikes, if you have made alterations to the master cylinder or any other parts relating to this kit, please check compatibility prior.
OTHER INFO:
-> The front fork extends 12mm (for quicker handling).
-> Not compatible with '21-'22 models due to a different clutch cable shape.
-> Due to changes in vehicle dimensions, a change to the vehicle inspection certificate might be required depending on your country's rules and regulations.
-> Requires brake hose replacement. This is an important safety part & must be performed at a certified workshop.
-> Cannot install the factory right cable guide.
-> Cannot use the factory left and right grips. Replacement grips are required for (120-125mm) grips.
-> Cannot be installed simultaneously with the separately sold tachometer kit (21912/21943).
-> Cannot be installed simultaneously with the Blast Barrier model-specific kit (26374/26375).
-> Requires drilling or other cutting to remove the factory ignition switch (drill out two blind bolts, full guide shows step by step process).
-> Due to discrepancies in the factory handlebar lock position (from factory), the handlebar stopper may need to be modified slightly. Each bike is slightly different to the next, so basic mod may be needed.
Daytona Japan (Daytona Corporation) has been a leader in motorcycle parts industry since 1972. Daytona provides original and customized motorcycle parts and accessories throughout Japan and to the international marketplace. Daytona’s specialty is R&D to develop original motorcycle parts and accessories which meet the demand in the highly competitive Japanese motorcycle industry and abroad.
