Product Overview
DAYTONA VELONA 48 ANTI-VIBE BRACKET, BLACK, 10° UP, 40334
Anti-vibration type meter stays are ideal for mounting delicate electric meters such as our VELONA φ48mm Speedometers & Tachometers. The anti-vibration rubber is incorporated into the 2.6mm thick steel bracket. then weighted collars are installed to help soften vibrations. A set of longer bolts are supplied to make your VELONA48 bolt up quick and easy. The meter mounting pitch (width) between the bolts is 33 mm which matches the VELONA 48 range. The bracket is attached to the bike with a M10 bolt (not included), or if you use the included M8 (8mm) alloy conversion washer, you can also install using an M8 bolt. And lastly unlike the standard brackets, the 40334 bracket has a hole for the meter wiring in the centre of the stay for smart installation. Look at the dimensional drawings and check the angle and size suits your needs.
Features:
- Bracket: Steel with a matte black paint finish.
- Washers: Bolts, Spacers: Steel / black zinc plated finish
- Conversion washer: Aluminium / Silver (used for M10 to M8 conversion)
- Origin: Made in Japan
Included:
- Bracket × 1
- Washers × 2
- Bolts × 2
- Collars × 2
- Rubber dampers × 2
- M8 conversion washer × 1
*Image shown here with gauge fitted is for an example of the wiring. This gauge mount is the same but has a 10 degree up bend.
Attention:
* This is a general-purpose product, always check the meter mounting pitch (bolt width) and the shape of the bottom of the meter (especially the wiring out position) before selecting the corresponding product.
* Mechanical 48mm (meters), If there is a screw head on the bottom of the meter, it cannot (or may not) be possible to install in a completely flat position. Please arrange the collar/spacers and or washers necessary to adjust if you need to space the gauge up.
Caution:
*φ80mm and φ60mm VELONA meters cannot be used as the mounting width differs, (see our stainless anti vibe options suitable for other gauge sizes).
