DAYTONA GB350/S -"SHORT" HIGH-SPEC BRAKE LINE, FOR CLIP ON BAR USE, 28189
The Daytona special GB350/S "HIGH-SPEC" stainless mesh brake line here is specifically designed for the GB350 / GB350S use when installing clip-on handlebars or low-down bars such as clubman bars. When converting to clip-on bars, it is essential to ensure that all cables and brake lines are the correct length to maintain safe operation and proper routing.
This specific line is supplied in two parts. The upper line to master cylinder is approx. -80mm short (8cm), the lower is the standard length. The short GB350 brake line is supplied with new brake line washers as shown and the line is manufactured to eliminate excessive overhang when fitting low bars (clip - on bars etc.) providing a much cleaner and more integrated look for your build. If going to the trouble of doing a clip-on conversion, don't let your conversion work down or look half done, finish the job like the pros and use the correct cables and brake line!
EXTRA INFO:
These Japanese-made lines are built to the highest standards, featuring a neoprene outer coating to resist oil, sun, and water damage, along with steel banjo end fittings for maximum strength. They are DOT marked and tested to exceed FMVSS 106, JIS, and ISO safety standards. Also, this is the same high-quality line included in our clip-on bar kits 42653 and 42411, making it the ideal choice for DIY conversions or repair and replacement.
Whether you are performing a repair, an upgrade, or a custom build, this Daytona High Spec line ensures improved performance and durability compared to OEM and allows you to do the clip-on conversion the right way!
SUITS:
HONDA - GB350/GB350S ('21~'25) <2BL-NC59>
DETAILS:
-> Banjo material: Steel
-> Inner hose layer: Teflon, Outer: Stainless with a neoprene cover.
-> Construction: The hose banjo fitting is crimped to guarantee sealing, safety and performance.
-> Recommended: Please use with the OEM banjo bolts or equivalent.
-> Origin: Made in Japan
+ Brake line washers (gaskets) are supplied within this kit.
ATTENTION:
1. Always use new gaskets (washers) when fitting this line and always ensure the banjo bolt is compatible with the line fittings.
2. Banjo bolts that are recessed to allow proper fluid flow are recommended (or use OEM when not changing).
3. Changing any component on your brake system requires a very high level of experience and skill. This line should only be fitted by a licensed qualified mechanic in licensed workshop.
4. The brake system will require bleeding before use; bleeding of the system should only be carried out by qualified mechanics.
5. Brake hose replacement work is required. Because it is an important safety component, it is mandatory to work at a certified licenced workshop.
6. Because the GB350/S has ABS fitted, the difficulty of bleeding the air from the system can be difficult.
7. Careful work is required to prevent air from being trapped in the ABS module.
8. Never turn the ignition on while working.
Daytona Japan (Daytona Corporation) has been a leader in motorcycle parts industry since 1972. Daytona provides original and customized motorcycle parts and accessories throughout Japan and to the international marketplace. Daytona’s specialty is R&D to develop original motorcycle parts and accessories which meet the demand in the highly competitive Japanese motorcycle industry and abroad.
All Daytona products are backed with a 12-month manufacturer's warranty within Australia, and a 30-day returns policy. Please see our warranty and return pages for full details. Warranty information can be found in the terms-of-use page & Returns is within shipping and returns. *Excludes normal wear and tear, accidents and any parts modified in any way.
