Product Overview
DAYTONA “CB750K0 TYPE HANDLEBAR”, 22.2MM CHROMED, 66408
The Daytona “CB750K0 TYPE HANDLEBAR”, is a replica CB750 style bar which is part of the “Daytona 70’s style bar series”. Whether you know the bikes of 70s or not, get a taste of the atmosphere of the 70’s using this bar! The CB replica bar can be used on many bike models with 22.2mm bars. Suitable for vintage inspired builds, OEM replacement or custom builds. Commonly used on the SR400/500, XS650 & W800/W650. Also used on classic and modern Triumph model (bikes with 22.2mm spec).
Specifications:
- Size: 800mm wide x 100mm high x 160mm PB
- OD: 22.2mm, (7/8”)
- ID: 19mm
Features:
- Made from high strength steel, to meet JIS standards.
- High quality chrome finish.
- Reminiscent of the 70’s style CB classic bar.
- A universal use bar, with a general-purpose knurling width.
- Made in Japan to ensure quality is maintained.
Note:
The first image (white background) was taken of the bars while still in the protective film. Finish is a nice chrome like shown in the other images!!
*For the SR400/500,
See our SR kits using this "CB750K0 style" bar, supplied with all required cables.
Or check the Daytona cable recommendations below. Shown is STD and then required/recommended length.
- De-Comp: STD = 671mm > change to: +120mm (p.n 22356)
- Clutch: STD = 975mm, > change to +150mm (p.n 22357)
- Brake Cable: STD =1080mm, > change to +200mm (p.n 22358)
- Throttle: STD Push = 1010mm, STD Pull = 1060mm > change to: +120mm (p.n 22355)
- Wiring harness: > No change (use original)
- De-Comp: STD = 671mm > change to: +120mm (p.n 22356)
- Clutch: STD = 975mm > change to +150mm (p.n 22357)
- Brake Line: STD =780mm, > change to +220mm (p.n 60578) *1000mm A spec
- Throttle: STD Push = 990mm, STD Pull = 990mm > change to: +120mm (p.n 39885)
- Wiring harness: > No change (use original)
SR400/500 (78-87):
Details for early model cables and brake line/cables coming soon. If you have an early model, ask for details, all required cables are in stock.
Attention:
- Please see specs above for details.
- This bar is 22.2mm. If using on the W650, you will need to purchase shims separately, (2x sets are required for the W650).
- Due to the size and width of this bar, you may require longer cables, and brake line depending on your bike model and year model.
- Bars are a general-purpose handlebar. To install, it might be necessary to drill a hole for LHS / RHS switches or notch the bar, (eg: W650/800 etc.).
- As these are a universal bar, please check the specs above and ensure these will fit your clamp width, throttle, use & application etc.
- If you have a bike with 1inch bars and require 25.4mm (1") to 22.2mm (7/8") shims, see our handlebar shims (26752).
