Product Overview
DAYTONA, W800/W650/W400 SADDLE BAG SUPPORT, BLACK, LEFT SIDE, 20498
The Daytona Kawasaki W series LHS saddle bag support is made as a dedicated bolt on part for the W800/ W650 & W400. This updated version is black and has been revised to also suit the later model W800's. The design allows for the correct side overhang, and it has sufficient length to offer bag protection to the shock & rear wheel etc. The support bracket has lower strap loops and is made to fit with the Daytona & Henly B saddle bags we sell. Use with third party bags is often possible also, however we highly recommend the Daytona bags for correct and secure fitment.
DETAILS:
+ Suits: Left Side, Dedicated bolt on part (W800, W650 & W400).
+ Material: Round steel bar Φ10mm (diameter), with a gloss black finish.
+ Size: Height 310mm, Width 200mm (support part).
+ Sold individually, if you need a LHS and RHS set, please also order #19673 for RHS.
+ Can be fitted to stock (factory) frame with or without the factory grab bar.
+ Can be fitted with some custom seats as long as the frame mounting point is intact. *However, also consider the seat edge clearance is sufficient and is similar to stock - (check images for example).
COMPATIBLE MODELS:
â– W800 ('11~'21)
■W800 STREET ('19~' 21）
■W650（'99~'08）
■W400（'06~'08）
+ MEGURO K3 and W800 STREET/CAFÉ ('19-'21) have not yet been confirmed.
OPTIONAL - SADDLEBAGS:
-> If you also need pannier bags, see our range of pannier bags (saddlebags) sold separately in the Ride Gear Section!
EXTRA INFO:
When fitting pannier bags (AKA: saddle bags) you need to keep in mind that saddlebags that get caught up in the rear wheel/chain or suspension and can cause serious accidents. The saddlebag support here is necessary to deter such entrapment.
This W800/W650 saddlebag support has the appropriate outward extension and sufficient vertical length to prevent contact with the rear suspension and rear axle. This helps to minimize scuffs and scratches on the saddlebags as well as avoid accidents from bags getting entangled in the rear wheel etc.
Example image of bag support being fitted with DAYTONA saddle bag.
ATTENTION:
1. If you have replaced the rear suspension and - or suspension specs / diameter etc. the saddlebag support may contact the altered rear suspension (e.g. aftermarket type shocks that differs to the factory shocks).
2. We cannot advise on fitment with third party bags. Many fit, but please do your own checks.
3. If a non-genuine muffler is attached, depending on the muffler shape / stay fitment method, it may not be possible to attach the right-side saddlebag support and bag *if clearance differs to standard.
4. Please use bags with a clearance of 50 mm or more between the muffler and the saddlebag.
5. When the bag is attached, the width of the vehicle increases, so please be careful when driving.
Daytona Japan (Daytona Corporation) has been a leader in motorcycle parts industry since 1972. Daytona provides original and customized motorcycle parts and accessories throughout Japan and to the international marketplace. Daytona’s specialty is R&D to develop original motorcycle parts and accessories which meet the demand in the highly competitive Japanese motorcycle industry and abroad.
