Product Overview
POSH UNIVERSAL “INDICATOR CROSS MOUNTING BRACKET", BLACK, STEEL, 090396-06
The POSH "UNIVERSAL INDICATOR CROSS BRACKET" is designed to integrate of indicator lamps where a mounting solution is required. Installing turn signal lamps can be a challenge when they are very small, or if the required clearance and position is not obtainable. By installing this bracket across your rear number plate mount (and bolting in place in conjunction with your plate mount), a no fuss situation for mounting your indicator lamps is easily achieved.
Or for those who are more capable, design an additional mount to install at the front of your bike similar to the W650 & Triumph cross brackets we offer allowing relocation of the indicators to the side of the fork tubes, (which allows for headlight changes - such as bates style lights) as well as the use of separate aftermarket headlight brackets in situations such as use of clip on bars.
Indicator fitting holes are M10. If using mini lamps with an M8 bolt or stem, you can easily mount using our M10 to M8 adapter washers (sold separately).
FEATURES:
+ Material: Steel, 2mm
+ Dimensions: Width 230× Height 30× Depth 25 (mm) (maximum width)
+ Mounting hole pitch: 120mm
+ Turn signal mounting hole diameter: Φ10mm
+ Colour: BLACK powder coating
EXTRA INFO:
-> Turn signals with M10 bolts can be fitted directly. (For lamps with an M8 bolt, you can add M8 to M10 adapter washers - sold separately).
-> Bracket cannot be attached at the same time as some of our license plate holders (unless you drill required holes).
-> Take care if fitting to fiberglass fender-less kits etc. as the weight of the bracket and two lamps may stress or crack the fiberglass mounting points.
**For an alloy light weight bracket (black) that is for light weight lamps, see our Daytona option sold and listed separately, with M8 mounting holes.
