Product Overview
POSH "SUPER-TRACKER" HANDLEBAR, STEEL, CHROMED, 023060-03
Last set available!!
The "CHROME PLATED" POSH dirt tracker style bar is a versatile option for retro "Dirt Tracker" & Scrambler builds as well as customs. With a diameter of 22.2mm (7/8"), they are a popular universal use bar often used on the SR400/500. They can also be used with the W800's and Triumphs if you drill the switch holes (or use with custom switches). Their attractive design and bend also make them a popular choice for custom builds on other bikes.
If you are looking for a classic styled dirt tracker bar with a wide stance and & nice pull back, the POSH Super T bars style bar may tick all the boxes for you!
SIZE AND INFO:
-> (22.2mm) / (7/8")
-> 820mm wide x 190mm high x 165mm pull back (approx. size).
FEATURES:
+ Made for those wanting a wide tracker style bar.
+ High strength construction - made of steel.
+ Colour: "CHROMED"
+ CNC mandrel bend processing to ensure a consistent bend.
+ Made in Japan.
ATTENTION:
1. See image examples above for specs and sizing & see images.
2. You may require longer cables and wiring to fit these bars (depending on your bike model).
FAQ's:
Q: Do I need longer cables and brake line on my W800?
A: Yes, you will need to use longer cables and brake line on your W800. See below.
1. 043011-CL: POSH long Clutch cable - (+150mm L)
2. 043011-AC: POSH long Throttle cables - (+150mm L)
3. 60598: DAYTONA High Spec Stainless Brake line - (D spec - 1000mm L).
*You can also use the W650 early model (High Bar) factory brake line as an alternative. However, we recommend the Daytona High Spec line for improved performance.
Q: Can I use this bar on my W650?
A: Only if you purchase the shims sold separately. And cables for low bar models.
*SR400/500,
Check the Daytona cable recommendations below. Shown is STD length and then required/recommended length. Cables and Brake line STD quoted lengths are approx. lengths from our data.
- De-Comp: STD = 671mm > change to: +120mm (p.n 22356)
- Clutch: STD = 975mm, > change to +150mm (p.n 22357)
- Brake Cable: STD =1080mm, > change to +200mm (p.n 22358)
- Throttle: STD Push = 1010mm, STD Pull = 1060mm > change to: +120mm (p.n 22355)
- Wiring harness: > No change (use original)
- De-Comp: STD = 671mm > change to: +120mm (p.n 22356)
- Clutch: STD = 975mm > change to +150mm (p.n 22357)
- Brake Line: STD =780mm, > change to +220mm (p.n 60578) *1000mm A spec
- Throttle: STD Push = 990mm, STD Pull = 990mm > change to: +120mm (p.n 39885)
- Wiring harness: > No change (use original)
SR400/500 (78-84): DISC BRAKE
- De-Comp: STD = 750mm > change to: +120mm (p.n 22356)
- Clutch: STD = 1085mm > change to +150mm (p.n 22357)
- Brake Line: STD =950mm, > change to +50mm (p.n 60598) *1000mm D spec
- Throttle: STD Push = 1090mm, STD Pull = 1090mm > use STD or change to: +100mm (010131-A1)
- Wiring harness: > No change (use original)
SR400/500 (85~87): DRUM BRAKE
- De-Comp: STD =750mm > change to: +120mm (p.n 22356)
- Clutch: STD = 1085mm > change to +150mm (p.n 22357)
- Brake Cable: STD =1050mm, > change to +200mm (p.n 22358)
- Throttle: STD Push = 1090mm, STD Pull = 1090mm > change to: +100mm (010131-A1)
- Wiring harness: > No change (use original)
ATTENTION:
1. Please see specs above for details.
2. This bar is 22.2mm. If using on the W650, you will need to purchase shims separately, (2x sets are required for the W650).
3. Due to the size and width of this bar, you may require longer cables, and brake line depending on your bike model and year model.
4. Bars are a general-purpose handlebar. To install, it might be necessary to drill a hole for LHS / RHS switches or notch the bar, (eg: W650/800 etc.).
5. As these are a universal bar, please check the specs above and ensure these will fit your clamp width, throttle, use & application etc.
6. If you have a bike with 1inch bars and require 25.4mm (1") to 22.2mm (7/8") shims, see our handlebar shims (26752).
