Product Overview
POSH 51mm Offset Air filter - 023028-PO. Commonly used on the SR400/500, tw200/225 & XT/TT500 with a 50-51 flange size.
Suits: TW200/225 and SR400/500. Also used on XT/TT500's and all Universal applications with a 50-51mm flange requirement. Often used with VM ss, CV, FCR large body & CR38 type carbs, as well as fitment to the TW200 intake pipe. Band clamp included.
Size:
- Filter Length: 128mm
- Outer Diameter: Φ88mm
- Rubber joint Length: 15mm (approx.)
- Mounting ID: Φ51mm (50-51mm)
- Air Filter Shape: Round
- Flange Angle: 0-5 degrees
- Filter Material: Cotton Gauze
Features:
- Suits: TW200/225, SR400/500, XT/TT500, Universal use (50-51mm).
- Colour: RED (ish)
- Material: Steel band clamp, Cotton Gauze filter with molded rubber
- Made in Japan
Note: Filter can be cleaned and is reusable. Can be cleaned and re oiled with the K&N re-charge kit as an example. *Do not clean with petrol or other chemicals that are not suitable for this filter.
Attention: All non standard air filters are sold for race use ONLY unless stated otherwise. Filter must be fitted correctly onto the carburetor, some carbs may require an adapter to install (please arrange it separately if required). Always tighten firmly, but do not over tighten the clamp as you may damage the filter. Always see regulations in your Country, State and Region before use. Only re-oil and clean with correct products.
