Product Overview
POSH 51mm Offset Air filter - 059028-PO. Commonly used on the SR400, SR500, XT500, TT500 etc.
Suits: SR400/500 using the VM ss carb, CV, FCR large body & CR38. Also suitable for all 51mm applications that require this size and offset. The POSH offset filter is supplied with a bonus 12mm machined alloy blow off fitting (for the breather line). The fitting can be installed into the filter flange to connect to the breather (via a hose), or leave as is and don't fit - (if using an external breather filter).
Size:
- Filter Length: 128mm
- Outer Diameter: Φ88mm
- Rubber joint Length: 75mm
- Mounting ID: Φ51mm
- Air Filter Shape: Round
- Flange Angle: 17 degrees
- Filter Material: Cotton Gauze
Features:
- Suits: SR400/500, SR400FI, XT500, Universal use (50-51mm).
- Colour: RED (ish)
- Material: Steel band clamp, Cotton Gauze filter with molded rubber
- Made in Japan
Note: Filter can be cleaned and is reusable. Can be cleaned and re oiled with the K&N re-charge kit as an example. *Do not clean with petrol or other chemicals that are not suitable for this filter.
Attention: All non standard air filters are sold for race use ONLY unless stated otherwise. Filter must be fitted correctly onto the carburetor, some carbs may require an adapter to install (please arrange it separately if required). Always tighten firmly, but do not over tighten the clamp as you may damage the filter. Always see regulations in your Country, State and Region before use. Only re-oil and clean with correct products.
