Product Overview
DAYTONA HEATED GRIPS, 4-LEVEL, 22.2MM (7/8"), OPEN END, BLACK, 88640.
The DAYTONA four level heated grips have the main switch neatly embedded within the left side grip. This allows for a neat and tidy finish, but also places the switch at your hand for safe and easy use. Due to the well thought out design, these grip are slim and and remain similar to the hand as factory grips (unlike some heated grips that are big and bulky!). Tried and tested in Europe and Japan for many years.
Check the video preview tab below for the overview of this product...
TECHNICAL INFO:
- Built-in electrical switch
- Fits 7/8" (22.2mm) handlebars
- 4 level heat control settings
- 5-color LED Indicators
- Quick-heat function for instant heat (up to 4 minutes)
- Quick heat function warms up immediately when switched on
- Length: 120mm
- Waterproof
- Dedicated 12 Volt use - (DC)
- Double-layer rubber grips allows for a smoother finish to the grip
- Can be installed to bikes equipped with a H.I.D. system
- Open end type grips (allows for bar end attachment and bar end mirror attachment)
- Grip inner diameter: (Right) Φ24.4mm & (Left) Φ21.2mm
ATTENTION:
-> For bikes equipped with H.I.D. systems, always start the engine and H.I.D. system *before turning on the power.
-> If the throttle sleeve has ribs, it may be necessary to remove them prior to fitment. We stock many options of flat face (smooth) throttle tubes that suit a wide range of models we support.
-> Even if the sleeve does not have ribs, you may still need to match the inside diameter of the grip.
-> Be sure to use a quality *Hot Grip Adhesive (as normal grip glue can melt, which can lead to accidents).
-> Cannot be used on vehicles with insufficient power generation capacity (small displacement vehicles such as Class 1 and 2 mopeds)
-> Cannot be used with bikes using a battery-less (capacitor) type electrical system.
-> Hot grips are consumable items. The grip part will wear out eventually. Please replace it periodically.
-> If installed on a vehicle with a small battery capacity and / or low power generation capacity, the insufficient charging capacity may cause battery trouble.
CAUTIONS:
-> Do NOT connect directly to battery.
-> Do NOT cut any wire to connect.
-> Do NOT connect to a wire that connects to immobilizer.
-> Do NOT connect to a wire that connects to headlight/winker/horn.
-> Do NOT connect to a wire that connects to ECU.
-> Some fuel-injected vehicles control the maximum current on some circuits. Be sure to connect the red wire from the Heated Grips to a circuit that has no such restriction. If in doubt consult your dealer.
Daytona Japan (Daytona Corporation) has been a leader in motorcycle parts industry since 1972. Daytona provides original and customized motorcycle parts and accessories throughout Japan and to the international marketplace. Daytona’s specialty is R&D to develop original motorcycle parts and accessories which meet the demand in the highly competitive Japanese motorcycle industry and abroad.
