Product Overview
DAYTONA “DIRT TRACKER HANDLEBAR”, 22.2MM, BLACK, 34837
The Daytona “DIRT TRACKER HANDLEBAR”, is a long-time favourite in our store. We have sold this handlebar for many years due to its popularity for Tracker style builds! The Black 830 Dirt Tracker bar can be used on many bike models that require 22.2mm bars. Suitable for Tracker inspired builds, OEM replacement (early SR or XS650 etc.) or us it on your custom build. Commonly used on the SR400/500, XS650, TW200, TW225, W800 & (W650 if you add shims). This bar is popular not just for its bend and style, but also because of its great price point for a quality Japanese made handlebar! It is also often used on classic and modern Triumph model (bikes with 22.2mm spec). Made in Japan with seamless steel tubing, finished in quality black electro plating.
Specifications: (please check specification image above)
- 830mm Wide
- 105mm High
- 213mm Pull Back
- 130mm base (clamp) area
- OD: 22.2mm, (7/8”)
- ID: 17.6mm
Features:
- Made from high strength stainless steel, to meet JIS standards.
- T2.3 tubing is used for strength, so bar can be used on or off road.
- High quality Black finish.
- Reminiscent of the Dirt Tracker style bars.
- A universal use bar, suitable for many bike models.
- Made in Japan to ensure quality is maintained.
*For the SR400/500,
See our SR kits using this "DAYTONA - DIRT TRACKER" bar, supplied with all required cables.
Or check the Daytona cable recommendations below. Shown is STD length and then required/recommended length.
Cables and Brake line STD quoted lengths are approx. lengths from our data.
- De-Comp: STD = 671mm > change to: +120mm (p.n 22356)
- Clutch: STD = 975mm, > change to +150mm (p.n 22357)
- Brake Cable: STD =1080mm, > change to +200mm (p.n 22358)
- Throttle: STD Push = 1010mm, STD Pull = 1060mm > change to: +120mm (p.n 22355)
- Wiring harness: > No change (use original)
- De-Comp: STD = 671mm > change to: +120mm (p.n 22356)
- Clutch: STD = 975mm > change to +150mm (p.n 22357)
- Brake Line: STD =780mm, > change to +220mm (p.n 60578) *1000mm A spec
- Throttle: STD Push = 990mm, STD Pull = 990mm > change to: +120mm (p.n 39885)
- Wiring harness: > No change (use original)
SR400/500 (78-84): DISC BRAKE
- De-Comp: STD = 750mm > change to: +120mm (p.n 22356)
- Clutch: STD = 1085mm > change to +150mm (p.n 22357)
- Brake Line: STD =950mm, > change to +50mm (p.n 60598) *1000mm D spec
- Throttle: STD Push = 1090mm, STD Pull = 1090mm > use STD or change to: +100mm (010131-A1)
- Wiring harness: > No change (use original)
SR400/500 (85~87): DRUM BRAKE
- De-Comp: STD =750mm > change to: +120mm (p.n 22356)
- Clutch: STD = 1085mm > change to +150mm (p.n 22357)
- Brake Cable: STD =1050mm, > change to +200mm (p.n 22358)
- Throttle: STD Push = 1090mm, STD Pull = 1090mm > change to: +100mm (010131-A1)
- Wiring harness: > No change (use original)
Attention:
- Please see specs above for details.
- This bar is 22.2mm. If using on the W650, you will need to purchase shims separately, (2x sets are required for the W650).
- Due to the size and width of this bar, you may require longer cables, and brake line depending on your bike model and year model.
- Bars are a general-purpose handlebar. To install, it might be necessary to drill a hole for LHS / RHS switches or notch the bar, (eg: W650/800 etc.).
- As these are a universal bar, please check the specs above and ensure these will fit your clamp width, throttle, use & application etc.
- If you have a bike with 1inch bars and require 25.4mm (1") to 22.2mm (7/8") shims, see our handlebar shims (26752).
