DAYTONA "POWER ADVANCE" AIR FILTER, 45MM, OVAL, 63359

 DAYTONA "POWER ADVANCE" UNIVERSAL AIR FILTER, 45MM (OVAL / STRAIGHT TYPE) - 63359

The DAYTONA power filter is an oval shaped pod filter. Flange size is 45mm. Filter is compatible with high rotation and high output mufflers. Performance-oriented power filter is part of the "power advance" series. When fitting always check the flange size is compatible and you have sufficient room to install the filter. 

Setting of the main jet / tuning of the carb will most likely be required separately. If jets are required, we sell kits for the SR400/500, TW200/225, W650 etc.

SUITS:
Flange size: 45mm

NOTE: 
*Filter can be cleaned and is reusable. The filter can be cleaned and re oiled with the K&N re-charge kit as an example.
*Do not clean with petrol or other chemicals that are not suitable for this filter.)
*The air filter is a consumable. If it is severely dirty or damaged, it needs to be replaced.
* On models with high vibrations (SR400/500 for example) or for offroad use, we recommend bonding the flange in place to filter body with sealant once position is aligned.

ATTENTION:
1. All non-standard air filters are sold for race use ONLY unless stated otherwise.
2. Filter must be fitted correctly onto the carburetor; some carbs may require an adapter to install (please arrange it separately if required).
3. Always tighten firmly, but do not over tighten the clamp as you may damage the filter.
4. Always see regulations in your Country, State and Region before use. Only re-oil and clean with correct products.

FLANGE SIZE:
The flange size is not shown below, the specs are the physical size only. Please check the flange size from details above.

Daytona Japan (Daytona Corporation) has been a leader in motorcycle parts industry since 1972. Daytona provides original and customized motorcycle parts and accessories throughout Japan and to the international marketplace. Daytona’s specialty is R&D to develop original motorcycle parts and accessories which meet the demand in the highly competitive Japanese motorcycle industry and abroad.

All Daytona products are backed with a 12-month manufacturer's warranty within Australia, and a 30-day returns policy. Please see our warranty and return pages for full details. Warranty information can be found in the terms-of-use page & Returns is within shipping and returns. All parts should be fitted by licenced or professional mechanics, and parts should not be altered or modified in anyway. Excludes accident damage, incorrect fitment and use of products, excludes race use.