Product Overview
DAYTONA/NISSIN "REPAIR KIT" FOR HORIZONTAL BRAKE M/C (5/8"), 23259
The Daytona / Nissin "5/8" Repair Kit" is for overhaul of Daytona (NISSIN) Horizontal type Brake Master Cylinder.
SIZE:
-> 5/8-inch, Approx. 16mm (or 15.875mm)
CONTENTS:
-> Piston x 1
-> Primary Cup seal x 1
-> Secondary Cup seal x 1
-> Boot x 1
-> Spring x 1
-> Circlip x 1
Note: Recommended use with DAYTONA / NISSIN horizontal master cylinders.
ATTENTION:
+ Dot5 brake fluid is not suitable for use with this MC repair kit or DAYTONA/NISSIN Horizontal master cylinders. Do not use Dot5 (BF5) silicon-based brake fluids.
+ Bleeding, in some cases, bleeding may be difficult after repair due to *not only the condition of the master cylinder *but also the condition of related brake parts.
+ Maintenance on the caliper side may also be required. Check your caliper also.
+ Always use your factory workshop manual for instructions on repairing your Nissin Master cylinder.
+ Calipers, 6POT calipers tend to be more difficult and take longer to bleed than 4POT, but if you understand the procedure and do the work, bleeding is possible,
+ It is essential to bleed air from related parts for safety, so please take the time to perform the task reliably.
+ Always use new gaskets (washers) when fitting the brake line to this master cylinder.
+ Always ensure the banjo bolt is compatible with the master cylinder thread, depth and the line fittings size.
CAUTION:
+ The brake system will require bleeding before use, as outlined above, bleeding of the system should only be carried out by qualified mechanics.
+ Always ensure the Master cylinder repair kit size is correct for your application.
*Changing any component on your brake system requires a very high level of experience and skill. This master cylinder repair kit (& related parts) should only be fitted by a licensed qualified mechanic in licensed workshop.
Daytona Japan (Daytona Corporation) has been a leader in motorcycle parts industry since 1972. Daytona provides original and customized motorcycle parts and accessories throughout Japan and to the international marketplace. Daytona’s specialty is R&D to develop original motorcycle parts and accessories which meet the demand in the highly competitive Japanese motorcycle industry and abroad.
